ATM350 Cardioid Condenser Clip-On Microphone
Supplied with Audio-Technica’s versatile UniMount® clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, upright bass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter on the in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.
- Low-profile design for minimum visibility
- UniMount® clip permits accurate positioning, provides shock resistance and protects element
- Unique violin mount permits unobtrusive placement of microphone between the instrument’s bridge and tailpiece
- Crisp, clear, well-balanced response, even at high SPLs
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Interchangeable elements available for hypercardioid and omnidirectional polar patterns
- Corrosion-resistant contacts from gold-plated XLRM-type connector
- Rugged, all-metal design and construction for years of trouble-free use
| SPECIFICATIONS |
| ELEMENT |
Fixed-charge back plate permanently polarized condenser |
| POLAR PATTERN |
Cardioid |
| FREQUENCY RESPONSE |
40-20,000 Hz |
| LOW FREQUENCY ROLL-OFF |
80 Hz, 12 dB/octave |
| OPEN CIRCUIT SENSITIVITY |
–49 dB (3.5 mV) re 1V at 1 Pa |
| IMPEDANCE |
50 ohms |
| MAXIMUM INPUT SOUND LEVEL |
149 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) |
122 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO |
67 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS |
11-52V DC, 3.5 mA typical |
| SWITCH |
Flat, roll-off |
| WEIGHT (MICROPHONE) |
14.5 g (0.5 oz) |
| WEIGHT (POWER MODULE) |
81.2 g (2.9 oz) |
| DIMENSIONS (MICROPHONE) |
37.8 mm (1.49") long,
12.2 mm (0.48") diameter |
| DIMENSIONS (POWER MODULE) |
92.9 mm (3.66") long,
18.9 mm (0.74") diameter |
| OUTPUT CONNECTOR (POWER MODULE) |
Integral 3-pin XLRM-type |
| CABLE |
4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connector |
| ACCESSORIES FURNISHED |
AT8542 power module; AT8418 UniMount® microphone instrument mount; AT8468 violin mount; soft protective pouch |
| AUDIO-TECHNICA CASE STYLE |
M36 |
| SPECIFICATION GRAPHS |
| |
|
|
POLAR PATTERN
|
|
|
FREQUENCY RESPONSE
|
|
